fbpx

RP Frac Plug Setting Tools

Disposable tools eliminate well-site redressing errors.

Disposable Setting Tools

RP Frac Plug Setting Tools

THESE COMPACT, LIGHTWEIGHT TOOLS CAN BE HANDLED BY ONE PERSON

The RP10 and RP20 single- and limited-use, disposable setting tools are patented setting tools manufactured by Repeat Precision. Just remove the assembly from the shipping carton, install a frac plug using Baker 10 or Baker 20 adapter kit (provided by the frac plug vendor), and insert a power charge*. After the tool strokes to set the frac plug, it automatically releases pressure before it is retrieved. At the surface, simply remove the setting tool from the gun string and set it aside for recycling. No disassembly, no inspection, no redressing. The adapter kit is reused at the operator’s discretion.

*Contact Repeat Precision for power charge options.

INVENTORY LOCATED NEAR EVERY MAJOR BASIN

  • Factory Assembled

    Eliminate well-site redressing errors

  • Designed with HSE in mind

    No pressure discharge at surface

  • Extra Strength

    6,000 lbs of anti-preset built in!

  • Redundancy for optimization

    Two bleed ports are protected by threaded nylon screws

  • Lightweight

    The assembly is less than 46 inches long, weighs 55 lb or less, and can be handled by one person

  • Compact size

    The short length allows additional guns for each stage

FILL OUT THE FORM BELOW FOR MORE INFO

Call Now ButtonOrder Now