DOWNLOADABLE SPECIFICATION SHEETS

The PurpleSeal Express™

It’s compact, lightweight, preassembled, and disposable. No more rig-site redressing and assembly errors that cause costly soft-sets and pre-sets.

PurpleSeal Express System– Setting Tool + Frac Plug

COMPACT, LIGHTWEIGHT, SINGLE-USE DEPLOYMENT ASSEMBLY

The exclusive PurpleSeal Express™ system streamlines frac plug installation and minimizes presets and soft-sets that cause costly delays during wireline operations. The system combines a PurpleSeal™ frac plug with a version of Diamondback Industries’ patented SS Disposable Setting Tool.® The plug and tool are pre-assembled and delivered to the well-site with connections thread-locked or torque-tightened to prevent back-off. Just remove the assembly from the shipping carton, insert a Diamondback Eliminator™ charge, install a firing head/igniter, and make the assembly up to the gun string. No shear screws or set screws to install, no connections to tighten, no oil to add. After the tool strokes to set the frac plug, it automatically releases pressure before it is retrieved. At the surface, simply remove the setting tool from the gun string and set it aside for recycling. No disassembly, no inspection, no redressing.

PS-X All-Composite Frac Plug

Our top-of-the line, high-performance frac plug.

PurpleSeal™ PS-X by Repeat Precision

PS-X All-Composite Frac Plug

COMPACT, LIGHTWEIGHT, SINGLE-USE DEPLOYMENT ASSEMBLY

The PurpleSeal™ PS-X is an all-composite frac plug with powdered-metal buttons in the upper and lower slips, rated up to 10,000 psi (68.9 MPa). Proprietary high-strength composite materials ensure uniform performance and durability at temperatures up to 250° F (121° C). Interlocking castellations on the slips and end caps and a contoured interface between the slips and cones eliminate component rotation to ensure even, concentric slip expansion. With minimal metallic content—approximately 1%—PurpleSeal frac plugs consistently drill out in 8 minutes or less.

The PurpleSeal™ Bridge Plug

Premium design and high performance at a great price.

The PurpleSeal™ Bridge Plug

OUR STATE OF THE ART, HYBRID-SLIP “KILL” PLUG

The PurpleSeal™ Bridge Plug is a hybrid-slip “kill” plug that provides temporary wellhead isolation from the zones below after a frac. The plug contains a cast-iron upper slip and powdered-metal buttons in the lower slip. The plug is rated to 10,000 psi from above and 8,000 psi below. Proprietary high-strength composite materials ensure uniform performance and durability at temperatures up to 200° F. Interlocking castellations on the slips and end caps and a contoured interface between the slips and cones eliminate component rotation to ensure even, concentric slip expansion. The plug ID is sealed by a trapped composite component that is drilled out prior to the upper slips to equalize pressure.

RP Setting Tool

Disposable tools eliminate well-site re-dressing errors.

Disposable Setting Tools

RP SINGLE-USE FRAC PLUG SETTING TOOLS

COMPACT, LIGHTWEIGHT, SINGLE-USE DEPLOYMENT ASSEMBLY

The RP10 and RP20 single-use, disposable setting tools are adaptations of Diamondback Industries’ patented SS Disposable Setting Tool.® Just remove the assembly from the shipping carton, install a frac plug using Baker 10 or Baker 20 adapter kit (provided by the frac plug vendor), and insert a Diamondback Eliminator™ power charge. After the tool strokes to set the frac plug, it automatically releases pressure before it is retrieved. At the surface, simply remove the setting tool from the gun string and set it aside for recycling. No disassembly, no inspection, no redressing. The adapter kit is reused at operator’s discretion.