PurpleSeal™ Composite Bridge Plug
BRIDGE THE GAP WITH PURPLESEAL™
PurpleSeal™
The PurpleSeal™ bridge plug is a hybrid-slip “kill” plug that provides temporary wellhead isolation from the zones below after a frac.
These bridge plugs are designed with proprietary high-strength composite materials to ensure uniform performance, durability, and industry-leading drill-out. Interlocking castellations on the slips and end caps, coupled with a planar interface between the slips and cones, keep components from rotating and allow for even slip expansion.
PurpleSeal™ bridging plugs are designed to equalize pressure across the plug before drilling out the upper slip. This lightweight drillable bridge plug comes with a pump-down fin with every plug and has a patented element backup mechanism to prevent leakage from seal extrusion failures. Get premium design, high performance, and proven durability at a great price.
You might also be interested in:
Features of the PurpleSeal™ bridge plug
- Rated to 8,000 PSI from below and 10,000 PSI from above
- High-strength composite materials used for internal pressure barriers
- Cast-iron upper slip
- All composite version available with no metal content
- Powder metal buttons in lower slip
- Composite sealing mechanism drills out before upper slips
- Signature purple rubber
How to use it
- Remove the PurpleSeal™ drilling bridge plug from its box.
- Assemble the three-part adapter kit onto the setting tool.
- Insert five or six screws into the plug and adapter kit.
- Start pumping from surface and enjoy the speed limit–free ride!
Frequently Asked Questions
What makes the PurpleSeal™ frac plug different?
The PurpleSeal™ composite plug comes with certain luxuries that other plugs just don’t offer:
- Fully rated top and bottom slips to ensure a strong pack-off
- Built-in rubber element backup system to reduce the risk of rubber flowing during frac and causing plug slippage
- Over 1” of casing engagement by the rubber element when the plug is set
- Flat surfaces on the cones and slips to ensure even casing engagement, smaller debris, and better drill-out
- Fused slips and cones to avoid pre-sets, side damage, and excessive flow rates during pump-down
- Better pump-down than 99% of frac plugs on the market
- Best-in-class service that’s built into our plug pricing
Why should Ichoose a composite frac plug over a plug with a cast iron slip?
Composite plugs are known for being reliable and drillingout easily. They’re also lighter and easier to manufacture than plugs with castiron slips, which makes them less expensive. In comparison, plugs with castiron slips are much denser than composite and leave more material behind duringdrill-out. This can cause plenty of problems, especially with long laterals.
How much does the PurpleSeal™ frac plug weigh?
The weight of a PurpleSeal™ composite plug will vary depending on which size you’re using:
- 480: 16.82 lb
- 455: 13.71 lb
- 438: 12.23 lb
- 360: 7.18 lb
What materialare the slip bands on the PurpleSeal™ frac plug?
The slip bands on PurpleSeal™ frac plugs are made fromthe same material as the mandrel, cone, mule shoe, and other components. Thesearen’t your grandpa’s frac plugs. You won’t find baling wire or rubber bandshere—just thinly wrapped, filament-wound tubes that are precisely machined tobreak in a pre-determined range of force.
How quickly can I run a PurpleSeal™ frac plug?
PurpleSeal™ composite frac plugs have just one speed limit: not free falling over 400 feet per minute in the vertical or curve. Otherwise, if you want to go fast—and we respect that hustle—we suggest pumping 2–4 barrels per minute to offset the fluid bypass around the plug.
We run upwards of 75% of fluid speed with the pump-down fin, while otherplugs are 40–50
- For 5.500” casingapplications, keep the pump-down fin on. You should expect 550-650 feet perminute when you’re pumping 18–20 barrels of water per minute.
- For 4.500” casingapplications, keep the pump-down fin on. Expect 450–500 feet per minute whenyou’re pumping 14–16 barrels of water per minute.
In all applications, when you remove the pump-down fin, expect to lose about 50–75 feet per minute.
How fast can I pull the PurpleSeal plug out of the hole?
While we love working fast, we recommend pulling outof the hole no faster than 200 feet per minute while the plug is still attachedto the BHA.
Frac plug vs bridge plug: what’s the difference?
When comparing our frac plugs vs bridge plugs plugs, the main differenceis that frac plugs have a flow-through mandrel ranging from 1-1.25 inches indiameter. Both PurpleSeal™ fracking plugs and bridging plugs are rated for 10,000psi from above, whereas bridge plugs are also rated from 8,000 psi from belowto keep your wellbore in check.
What software pairs with PinPoint?
Use Warrior System with Unifire to pair with PinPoint internal orienting guns.
What addressable switch can I use?
We can configure our systems to run with most wired switches. That said, we recommend using SRS switches due to their communication system, support, and track record of success.
What shaped charge can I use?
Our systems are designed to work with any available charges on the market. For extra convenience, you can get Forcellant power charges delivered along with your PinPoint guns.
What differentiates Repeat Precision’s offerings in the perforating market?
When you work with Repeat Precision, you get the best service in the industry—anytime, anywhere, completely free of charge. Our technical personnel hand-deliver your products to the site for that extra level of attention. And when you have questions, you can always ask the person who knows the answer, whether they designed the system or just delivered it.
What setting tool can I use with your systems?
Our systems are designed to run with all setting tools. We especially recommend disposable setting tools because they expose the bottom hole assembly to a certain amount of force during plug setting.
Do you offer an internally oriented perforating system?
Yes, PinPoint utilizes internal weighting to orient the charge assembly by utilizing gravity.
Why should I choose PinPoint?
Other internal orienting systems struggle with communication due to inconsistent connection caused by weak grounding, usually through the use of bearings, brushes, or grounding springs. Unlike these other systems, PinPoint offers a triple-redundant grounding system that grounds directly to the sub. The precisely machined surface provides the most robust electrical integrity, giving you a better connection.
